Page 1 of 1

Zyxel NSA325 V1

Posted: Fri 23. Aug 2019, 11:55
by PB1212
Ich habe ein Zyxel NSA325 V1, schon länger in Originalzustand Betrieb ohne Probleme.
Seid gestern habe ich keinen Zugriff mehr auf meine Platten, es leuchtet die blaue LED + gelegendliches blinken. und
die grüne HDD2 LED leuchtet schwach. In meinem netzwerk wird das Nas nicht mehr gefunden, da es nicht mehr bootet.
Ich hab schon alles probiert Platten raus, Reset etc. alles ohne Erfolg.
Nach meiner Recherche ist das wohl ein Firmwareproble. und im deutschen Zyxelforum.de was es nicht mehr gibt, gab es eine Lösung dafür, mit einem Bootstick.
Kann mir da jemand helfen oder ist der NSA ein Fall für den Wertstoffhof ?

Re: Zyxel NSA325 V1

Posted: Sat 24. Aug 2019, 12:29
by shv
Sieh Dir bitte mal den folgenden Link an. Vieleicht hilft das weiter.
http://metarepo.tk/Users/Mijzelf/RescueSticks/

Re: Zyxel NSA325 V1

Posted: Sun 25. Aug 2019, 14:52
by PB1212
Danke für den Hinweis.
Ich hab mir das passende Image runtergeladen und auf einem FAT formatierten USB Stick kopiert.
aber der NSA 325 weigert sich davon zu booten. Ich hab noch andere Sticks probiert verschieden formatiert immer das gleiche.
Dann hat er wohl doch das zeitliche gesegnet.

Re: Zyxel NSA325 V1

Posted: Sun 25. Aug 2019, 18:40
by Mijzelf
Does (one of) the USB sticks have a led, and can you see it's accessed?

Re: Zyxel NSA325 V1

Posted: Sun 25. Aug 2019, 21:02
by PB1212
Yes some have a LED, who does not shine, two times very short, by booting.
I think the 5V is missing. The power supply is fine, I have tested it.

Re: Zyxel NSA325 V1

Posted: Mon 26. Aug 2019, 09:59
by shv
Nur etwas Brainstorming:
Hast Du verschiedene USB Anschlüsse probiert? Kannst Du mal versuchen, die USB Sticks mit Microtool Partition Magic zu formatieren. Ich hatte kürzlich ein ähnliches Problem beim Flashen eines Sat Receivers. Erst nachdem ich das besagte Programm zum Formatieren verwendet habe, wurde der Stick erkannt.

Re: Zyxel NSA325 V1

Posted: Mon 26. Aug 2019, 14:34
by PB1212
Ja klar hab alle Anschlüsse probiert, hab eben die ganze zeit Sticks mit dem Microtool formatiert, div Blockgrößen, aber ohne Erfolg.
Was mich nur stuzig macht ist das Image gepackt ist dort nsa310_fw ich hab doch ein nsa325 kanns auch daran liegen - ein umbenennen hat auch nicht geholfen.
Jedanfalls haben meine USB ports keine 5V da einige Sticks eine LED haben und die ja nicht leuchten bzw. beim booten nur kurzzeitig flackern.

Re: Zyxel NSA325 V1

Posted: Tue 27. Aug 2019, 08:45
by Mijzelf
PB1212 wrote:Was mich nur stuzig macht ist das Image gepackt ist dort nsa310_fw ich hab doch ein nsa325 kanns auch daran liegen - ein umbenennen hat auch nicht geholfen.
This is the 'official' rescue key, which ZyXEL provided years ago, and it's known to work. The nsa310 is older that the 325, and it has the same flash layout. 'They' simply exchanged the firmware to adapt an 310 key to a 325 key.
Jedanfalls haben meine USB ports keine 5V da einige Sticks eine LED haben und die ja nicht leuchten bzw. beim booten nur kurzzeitig flackern./quote]
You know only the back ports are supposed to work? The driver for the front (usb3) port is not yet loaded when the stick is accessed.

It is possible that your box has broken DC/DC converters. The powersupply supplies 12V (or 18? Can't remember), but the box needs a variety of voltages. 3.3V for the CPU, 5V for USB & harddisk, 12V for the harddisk, and maybe 1.8V for the memory. The main board contains some DC/DC converters for that, and yes, they can fail. In that case the box can be considered dead, although theoretically you could exchange the DC/DC converter.

Re: Zyxel NSA325 V1

Posted: Fri 30. Aug 2019, 15:53
by PB1212
I have checked the board, some DC/DC converters I have found are ok. The board becomes from psu 12V- voltages from 12 - 5 - 3,3 - 1,2 - 1 are aviable.
I think the board is dead
Thanks for helping.